Conveyor belt is composed by
In the transportation and storage of PVC conveyor belts, they should be kept clean to avoid direct sunlight or rain or snow, to prevent contact with acids, alkali oils, organic solvents and other substances, and be one meter away from the heating device. The large inclination conveyor belt is composed of a base belt, a rib and a transverse partition. The ribs prevent the material from slipping and falling. In order to easily bypass the drum, the ribs are designed in a corrugated shape; the role of the transverse partition is to support the material. In order to achieve a large inclination, a T-type TC is used. The ribs and the diaphragm are connected to the baseband by a secondary vulcanization method, and have high connection strength. The pattern conveyor belt is an oblique conveyor belt composed of a covering rubber with a working surface and a covering rubber with a flat non-working surface and a belt core. There are "herringbone" patterns on the belt surface that are higher than the belt body. The patterns can be open or closed. Each pattern can be divided into three types: high, medium and low.
During storage, the temperature in the warehouse should be maintained between -18 ℃ and 40 ℃, and the relative temperature should be maintained between 50-80% RH. During storage, the product must be placed in rolls, not folded, and it should be turned once a quarter during storage. Conveyor belts of different types and specifications should not be connected together, and the joints should preferably be glued together. The type, structure, specifications, and number of layers of the conveyor belt should be reasonably selected according to the use conditions. The running speed of PVC conveyor belts should generally not be larger than 2.5 m / s, materials with large block sizes and high abrasion properties, and the use of fixed plow-type unloading devices should use low speed as much as possible.
The pattern conveyor belt is an oblique conveyor belt composed of a covering rubber with a working surface and a covering rubber with a flat non-working surface and a belt core from Nylon conveyor belt manufacturer . There are "herringbone" patterns on the belt surface that are higher than the belt body. The patterns can be open or closed. Each pattern can be divided into three types: high, medium and low. The diameter of the transmission drum of the conveyor and the level of the conveyor belt, the matching of the recitation drum, the redirection drum, and the requirements for the groove angle of the idler should be selected reasonably according to the design rules of the conveyor. The feeding direction should follow the running direction of the tape. In order to reduce the impact of the material on the tape, a chute should be used to reduce the material falling distance. The receiving section of the tape should shorten the gap between the idlers and use a buffer idler.
A soft and moderate back plate should be used to avoid the back plate being too hard and scratching the belt surface of the conveyor belt.